Torte's 3D printer wiki

Please note that this is just work-in-progress.
The changes listed here may not be complete and are just quickly tested.
Thanks to Vasyl Gontar for his additions/corrections to this list.

• KlipperScreen
  • incomplete “.git” directory (throws errors on KIAUH update page)
  • revision must be around 926d78de01efb114d00e021364b04bbe6f28690b (Mar 8 2023)
  • translations are younger (~ Jun 16 2023)
  • some changes (theme “sovol dark” instead of “z-bolt”)

• fluidd: git information removed?
• mainsail: git information removed?

• added power loss recovery (plr)
  • see https://github.com/The--Captain/plr-klipper
  • ~/plr.sh modified? old version?: G31 (called from CANCEL_PRINT) calls ~/clear_plr.sh

• Kernel:
  • (unsure, if changed - but not working for all later kernels → spi-dev missing)
    • “/boot/dtb/rockchip/overlay/rockchip-fixup.scr”
    • “/boot/dtb/rockchip/rk3328-roc-cc.dtb”
    • see https://irq5.io/2018/07/24/boot-time-device-tree-overlays-with-u-boot/
    • see https://github.com/redrathnure/armbian-mkspi
  • Serial console (u-boot messages): 1500000,8,n,1

• u-boot (bootloader)
  • Sovols bootloader allows booting from an external device (USB-stick)
  • Booting from an external device (USB-stick)

• auto_refresh + auto_refresh.cpp
  • update helper
  • used by makerbase-auto-fresh.service
• beep.sh
  • beep if touch is pressed
  • used by makerbase-beep.service
• get_id + get_id.cpp
  • retrieves serial connection
  • used by makerbase-byid.service
• set-timezone.sh
  • update timezone, fetch time every 3 seconds via NTP (syslog spammer)
  • used by makerbase-timezone-monitor.service
• soft_shutdown.sh
  • sets up GPIOs for “supper” capacitor, effectively does nothing
  • used by makerbase-soft-shutdown.service
• hid-flash
  • unknown binary, source code missing
  • probably precompiled klipper/lib/hidflash
  • references

    /home/mks/ff-hid-flash.txt:Binary file /home/mks/_root/hid-flash matches
    /home/mks/klipper/src/stm32/Makefile:lib/hidflash/hid-flash:
    /home/mks/klipper/src/stm32/Makefile:   @echo "  Building hid-flash"
    /home/mks/klipper/src/stm32/Makefile:flash: $(OUT)klipper.bin lib/hidflash/hid-flash
    /home/mks/klipper/docs/Bootloaders.md:The hid-flash program is used to upload a binary to the bootloader. You
    /home/mks/klipper/docs/Bootloaders.md:~/klipper/lib/hidflash/hid-flash ~/klipper/out/klipper.bin
    /home/mks/klipper/docs/Bootloaders.md:As with the STM32F1, the STM32F4 uses the hid-flash tool to upload binaries to
    /home/mks/klipper/docs/Bootloaders.md:hid-flash.
    /home/mks/klipper/lib/hidflash/changes.diff: EXECUTABLE = hid-flash
    /home/mks/klipper/lib/hidflash/changes.diff:+   @echo "    hid-flash requires libusb-1.0, please install with:"
    /home/mks/klipper/lib/hidflash/changes.diff:+* This version of hid-flash has been modified to work with Klipper.
    /home/mks/klipper/lib/hidflash/changes.diff:-    printf("Usage: hid-flash <bin_firmware_file> <comport> <delay (optional)>\n");
    /home/mks/klipper/lib/hidflash/changes.diff:+    printf("Usage: hid-flash <bin_firmware_file> <comport (optional)> <delay (optional)>\n");
    /home/mks/klipper/lib/hidflash/Makefile:EXECUTABLE = hid-flash
    /home/mks/klipper/lib/hidflash/Makefile:        @echo "    hid-flash requires libusb-1.0, please install with:"
    /home/mks/klipper/lib/hidflash/README:The source for the hid-flash program in this folder is a deriviative of the
    /home/mks/klipper/lib/hidflash/README:The original source for hid-flash was written by Bruno Freitas, available
    /home/mks/klipper/lib/hidflash/README:1) The "port" argument is now optional.  If not supplied hid-flash will not
    /home/mks/klipper/lib/hidflash/README:2) When the serial port is specified, hid-flash will use Klipper's procedure
    /home/mks/klipper/lib/hidflash/README:3) The hid-flash program now accepts a command from the bootloader that allows
    /home/mks/klipper/lib/hidflash/README:   libusb-1.0 dependency for hid-flash.
    /home/mks/klipper/lib/hidflash/main.c:* This version of hid-flash has been modified to work with Klipper.
    /home/mks/klipper/lib/hidflash/main.c:    printf("Usage: hid-flash <bin_firmware_file> <comport (optional)> <delay (optional)>\n");
    /home/mks/klipper/lib/.gitignore:hidflash/hid-flash
    /home/mks/klipper/scripts/flash_usb.py:    args = ["lib/hidflash/hid-flash", binfile]
    /home/mks/klipper/scripts/flash_usb.py:        raise error("Error running hid-flash")
    /home/mks/klipper/scripts/flash_usb.py:# Flash via call to hid-flash
    /home/mks/findfiles:find / -xdev -type f -print0 | xargs -0 grep "\<hid-flash\>"
    Binary file /root/hid-flash matches
    /var/lib/dpkg/info/makerbase-client.md5sums:ef3573cd08e43b74bbd22ab2dfe68f3b  root/hid-flash
    /var/lib/dpkg/info/makerbase-client.list:/root/hid-flash

• uart
  • unknown binary, source code missing
  • references

    (tons of references found -> left out)
    /var/lib/dpkg/info/makerbase-client.list:/root/uart

• udp_server
  • unknown binary, source code missing
  • references

    /var/lib/dpkg/info/makerbase-client.md5sums:6f515dc45b55e81f496c64036318c75e  root/udp_server
    /var/lib/dpkg/info/makerbase-client.list:/root/udp_server
    Binary file /var/lib/selinux/default/active/policy.linked matches
    Binary file /var/lib/selinux/default/active/policy.kern matches

• Installs system updates
• Files: makerbase-auto-fresh-files
• Unofficial package: makerbase-auto-fresh-service.deb
• Details:
  • if existing: install /root/system_deb/*.deb and reboot
  • if existing: install /root/bootsplash.armbian and reboot
  • if USB drive found:
    • ensure running automounter (mounts to ./printer_data/gcodes/USB)
    • move armbian-update.deb from automount to /home/mks, then install and reboot
• Depends on makerbase-automount@.service
• Might become useful once there is an unbricking-package like Sovol's armbian-update.deb

• Mounts all storage devices/partitions under /home/mks/printer_data/gcodes/USB/
• Files: makerbase-automount-files
• Unofficial package: makerbase-automount-service.deb
• Useful for those who want to have USB-drives automatically mounted as gcode storage

• Beeps if touchscreen is touched
• Files: makerbase-beep-files
• Unofficial package: makerbase-beep-service.deb
• Details:
  • initializes GPIO#82 (beeper pin)
  • reads events from touchscreen (with vendor_product_id=*1a86*e5e3*)
  • beeps if touch-button got pressed
• Useful

• Updates serial: from section [mcu] in home/mks/printer_data/config/printer.cfg
• Files: makerbase-byid-files
• Unofficial package: makerbase-byid-service.deb
• Probably useless, the name of the serial connection doesn't change

• copies /boot/wpa_supplicant-wlan0.conf (if existing) into /etc/wpa_supplicant/
• Files: makerbase-net-mods-files
• Unofficial package: makerbase-net-mods-service.deb
• Probably useless, you can configure wifi on the screen

• looks disabled
• does something with the “supper” capacitor
• Files: makerbase-soft-shutdown-files
• Unofficial package: makerbase-soft-shutdown-service.deb
• Useless

• Fetches time via NTP every 3 seconds (spamming syslog)
• Update timezone to that from /home/mks/target_timezone.txt
• Files: makerbase-timezone-monitor-files
• Unofficial package: makerbase-timezone-monitor-service.deb
• requires /home/mks/target_timezone.txt
• Probably useless, works fine without

• configures wpa_supplicant
• Files: makerbase-wlan0-files
• Unofficial package: makerbase-wlan0-service.deb
• Probably useless, works fine without

• resumes print after power failure
• origin: https://github.com/The--Captain/plr-klipper
• Used files:
  • ~/printer_data/config/plr.cfg
  • ~/plr.sh
  • ~/clear_plr.sh
• Unofficial package: plr-klipper.deb
• Included in Sovol's default printer.cfg, thus it's recommended

remove power loss recovery

[include plr.cfg]

    SAVE_VARIABLE VARIABLE=was_interrupted VALUE=False
    RUN_SHELL_COMMAND CMD=clear_plr
    clear_last_file
    G31

[gcode_macro PRINT_START]
gcode:
    SAVE_VARIABLE VARIABLE=was_interrupted VALUE=True
[gcode_macro PRINT_END]
gcode:
    SAVE_VARIABLE VARIABLE=was_interrupted VALUE=False
    RUN_SHELL_COMMAND CMD=clear_plr
    clear_last_file