Differences

This shows you the differences between two versions of the page.

--- image [2024/03/25 15:34] – torte
+++ image [2025/01/21 12:27] (current) – torte
@@ Line 1: / Line 1: @@
-Here you will find a ready-to-use replacement image for Sovol's KlipperScreen:\\
+{{page>redirect#this_wiki_has_moved}}
-[[TODO]]
+https://torte71.github.io/InsideSovolKlipperScreen/image.html
+{{page>redirect#section}}
+----
+====== Sovolized Armbian Klipper Image ======
+==== For SV06/SV06+/SV07/SV07+ KlipperScreen (Makerbase MKS KLIPAD50) ====
+A ready-to-use replacement image for Sovol's KlipperScreen can be downloaded at:\\
+https://drive.google.com/file/d/1xy5em404ZeeOhga0X9CXQ6KVAzr-tuLX/view?usp=sharing\\
+(Extract it using [[https://www.7-zip.org/|7zip]])
 It is based on Maxims Medvedevs image for Makerbase boards and using a recent armbian-bookworm.
 (Sovol's image based on armbian-buster is outdated, there are no packages available for it any longer. So you can't easily add any additional packages.)\\
-[[https://github.com/redrathnure/armbian-mkspi/releases|Maxims image]] (Release 0.3.4-24.2.0-trunk; Armbian-unofficial_24.2.0-trunk_Mkspi_bookworm_current_6.6.17.img.xz)
+Maxims image: [[https://github.com/redrathnure/armbian-mkspi/releases|Release 0.3.4-24.2.0-trunk; Armbian-unofficial_24.2.0-trunk_Mkspi_bookworm_current_6.6.17.img.xz]]
 Please note that the **printer itself ("mcu") needs to be updated as well** (not just the KlipperScreen), otherwise it will complain about an outdated klipper version on the mcu and not be able to print.
-For convenience, there is a ready compiled mcu_firmware.bin in the image (which you can easily access directly after flashing, it's located in the root of the eMMC/USB-stick).
+For convenience, there is a **ready compiled mcu_firmware.bin** in the image (which you can easily access directly after flashing, it's located in the root of the eMMC/USB-stick).
@@ Line 32: / Line 41: @@
   * [[https://github.com/redrathnure/armbian-mkspi/releases|Maxims image]] (Version 0.3.4-24.2.0-trunk; bookworm; current-6.6.17 kernel)
   * {{wiki:rk3328-roc-cc.dtb|Customized dtb}} for enabling wifi & spidev
-  * Default Klipper install: KIAUH, Klipper, Moonraker, Mainsail, Fluidd, KlipperScreen, Crowsnest, G-Code-Shell-Command
+  * Default Klipper install: KIAUH, Klipper (v0.12.0-131-gd9043345), Moonraker (v0.8.0-324-ga3e4dac5), Mainsail (v2.10.0), Fluidd (v1.29.0), KlipperScreen (v0.3.9-64-g1c9d82a), Crowsnest (v4.1.6-1-ge96cd46f), G-Code-Shell-Command
+  * Numpy for input shaper (see [[https://github.com/vasyl83/SV07update#15-accelerometer-input-shaper|Vasyl's guide]])
   * Makerbase/Sovol [[sovol_mods#services|additions]]: makerbase-beep-service, makerbase-automount-service, Powerloss recovery/plr-klipper
   * Sovol's original [[https://github.com/Sovol3d/SOVOL_KLIPAD50_SYSTEM/blob/main/klipper_configuration/SV06/printer.cfg|printer.cfg for SV06]]
@@ Line 41: / Line 51: @@
 Settings you might want to change (or at least know):
-  * Language: en_US.UTF-8
-  * Location/Timezone: Europe/Germany
   * Password for user "root": ''makerbase''
   * Password for user "mks": ''makerbase''
+  * Location/Timezone: Europe/Germany
+To change the timezone, execute ''sudo armbian-config'' and select "Personal" and then "Timezone".
+The language has to be changed in KlipperScreen, Mainsail and Fluidd separately.
+----
 Thanks to all who helped testing, bug chasing and documenting.
 Special thanks to Vasyl Gontar for his support and of course to Maxim Medvedev for his work re-creating the build-system for the Makerbase boards.
+----
+Back to [[start]]